Description: ZD-CP copper gasket Solid copper gasket to make a leak tight UHV seal between two conflat flanges. Oxygen free high conductivity (OFHC) copper is normally used as this sealing material as it is very clean, can easily be formed to shape, has a wide temperature range, and has a low outgassing rate.
...

Description:Oval ring joint gasket is machined from solid metals in a variety of shapes.They are designed for high pressure, high temperature or highly corrosive applications.These basic shapes are used in pressures up to 10,000 psi. The dimensions are standardized and require specially grooved flanges.It is made of the most suitable material and shapes....

Description:Octagonal ring joint gasket is machined from solid metals in a variety of shapes.Octagonal ring joint gasket are designed for high pressure, high temperature or highly corrosive applications.ZD-G1810 ring joint gasket octagonal type is also called RTJ octagonal type. Similar to ZD-G1800, Ring Joint Gasket octagonal type is made from solid metal, but becomes octagonal shape. It is mechanically made from integral metal. The available materials include soft iron, SS304,...

Description:ZD-G1840 lens ring joints' highest pressure used is 3000atm,they have been used on pipe flanges in synthesizing line of ammonia and methand at high pressure and high temperature,in high pressure polymerizing line of polyethylene at 3000 atm....

Description:This is solid flat gasket which are cut from sheet metal, these gaskets can be of unlimited size and shape. mating surfaces need to be perfectly aligned and flat for metal gaskets to provide good seals.Based on the temperature and physical properties of medium, the materials of metal gaskets usually adopt aluminum, copper, soft steel, pure iron, stainless steel, titanium and Monel metal, etc. For example, for synthetic ammonia plant, aluminum and soft steel are usual...