 |
| Ring groover and angling machine |
Description:It is mainly used for outer ring milling grooves of metal winding gaskets and chamfering of inner rings. The use of air pump to control pressure, frequency conversion speed control; L does not need expensive lathes; can achieve a worker to operate multiple equipment, greatly saving manpower and financial resources; usually the diameter greater than 150mm can be used with the equipment milling slot, not limited by specifications;
The industrial control PLC computer t... |
Parameter： |
|
| Model：ZD-M25 |
|
|
 |
| Inner Ring Angling machine |
Description:Design for making angle of inner ring of SWG, Controlled by air pump. No longer expensive lathes need; One worker can see after more than 10 machines in same time; No problem for large sizes... |
| Parameter： |
|
| Model：ZD-M300 |
|
|
 |
| Polishing machine for metal rings |
Description:Metal inner ring polishing machine is a supporting equipment for metal disc ring machine. After the disc ring welding, the welding point is grinded and polished, and the metal ring polishing machine can also be used to light the whole surface of the metal ring. The equipment is a semi automatic equipment with high efficiency.
... |
| Parameter： |
|
| Model：ZD-M40 |
|
|
 |
| Metal Foil Puncher |
Description:For making tanged metal sheet. It is efficient with double line needle. Change single needles easily, and low cost. Dia. Of needle: Φ1.2mm, Φ1.5, for complex sheet thick.1.2~1.6mm, and 1.5~3.0mm... |
| Parameter： |
|
| Model：ZD-MG50 |
|
|
 |
| Complex Sheet Calendar |
Description:To compound graphite, asbestos and non-asbestos etc non-metallic sheet reinforced with tanged or smooth metal foil insertion. Roller Dia.300mm is normal for width 1000mm, and dia.350mm or 400mm for width 1500mm... |
| Parameter： |
|
| Model：ZD-MG60 |
|
|
